Imagine the vertical
Molding, or moulding (Commonwealth), also known as coving (UK, Australia), is a strip of material with various profiles used to cover transitions between surfaces or for decoration. It is traditionally made from solid milled wood or plaster, but may be made from plastic or reformed wood. In classical architecture and sculpture, the molding is often carved in marble or other stones.
A "sprung" molding has bevelled edges that allow mounting between two non-parallel planes (such as a wall and a ceiling), with an open space behind the molding. Other types of molding are referred to as "plain".
3 See also
5 Further reading
At their simplest, moldings are a means of applying light- and dark-shaded stripes to a structural objects without having to change the material or apply pigments. The contrast of dark and light areas gives definition to the object.
Imagine the vertical surface of a wall lit by sunlight at an angle of about 45 degrees above the wall. Adding a small overhanging horizontal molding to the surface of the wall will introduce a dark horizontal shadow below the molding, which in consequence is called a fillet molding. Adding a vertical fillet to a horizontal surface will create a light vertical shadow. Graded shadows are possible by using moldings in different shapes: the concave cavetto molding produces a horizontal shadow that is darker at the top and lighter at the bottom; an ovolo (convex) molding makes a shadow that is lighter at the top and darker at the bottom. Other varieties of concave molding are the scotia and congé and other convex moldings the echinus, the torus and the astragal.
Placing an ovolo directly above a cavetto forms a smooth s-shaped curve with vertical ends that is called an ogee or cyma reversa molding. Its shadow appears as a band light at the top and bottom but dark in the interior. Similarly, a cavetto above an ovolo forms an s with horizontal ends, called a cyma or cyma recta. Its shadow shows two dark bands with a light interior.
Together the basic elements and their variants form a decorative vocabulary that can be assembled and rearranged in endless combinations. This vocabulary is at the core of both classical architecture and Gothic architecture.
Decorative moldings have been made of wood, stone and cement. Recently moldings made of Expanded Polystyrene (EPS) as a core with a cement-based protective coating have become popular. These moldings have environmental, health and safety concerns that were investigated by Doroudiani et al.1
Execution of stucco in dwellings
The apartments are flats having different sizes. For sale they are available after both studios and flats four-room. Therefore, how to perform residential stucco needs to be adapted to the size of individual rooms, their amount and how to set them furniture. However, most often the stucco housing is included in the guest rooms, kitchens and floors and ceilings corridor. To implement it may be used various elements that remained in the apartment after previously performed finishing work or repair. Plaster can also be done with new materials, purchased at the request of owners of the apartment.
There are a variety of common moldings:
Astragal ? A semi-circular molding attached to one of a pair of especially fire doors to cover the air gap where the doors meet.
Baguette ? Thin, half-round molding, smaller than an astragal, sometimes carved, and enriched with foliages, pearls, ribbands, laurels, etc. When enriched with ornaments, it was also called chapelet.2
Bandelet ? Any little band or flat molding, which crowns a Doric architrave. It is also called a tenia (from Greek ?????? an article of clothing in the form of a ribbon.2
Baseboard, "base molding" or "skirting board" ? used to conceal the junction of an interior wall and floor, to protect the wall from impacts and to add decorative features. A "speed base" makes use of a base "cap molding" set on top of a plain 1" thick board, however there are hundreds of baseboard profiles.
Baton ? see Torus
Batten or board and batten ? a symmetrical molding that is placed across a joint where two parallel panels or boards meet
Bead molding ? narrow, half-round convex molding, when repeated forms reeding
Beading or bead ? molding in the form of a row of half spherical beads, larger than pearling
Other forms: Bead and leaf, bead and reel, bead and spindle
Beak ? Small fillet molding left on the edge of a larmier, which forms a canal, and makes a kind of pendant.2 See also: chin-beak
Bed molding ? a narrow molding used at the junction of a wall and ceiling. Bed moldings can be either sprung or plain.
Bolection ? a molding which is raised, projecting proud of the face frame. It is located at the intersection of the different surface levels between the frame and inset panel on a door or wood panel. It will sometimes have a rebate (or rabbet) at the back, the depth of the difference in levels, so that it can lay over the front of both the face frame and the inset panel and can in some instances thus give more space to nail the molding to the frame, leaving the inset panel free to expand or contract in varying climates, as timber is prone to do.
Cable molding or ropework ? Convex molding carved in imitation of a twisted rope or cord, and used for decorative moldings of the Romanesque style in England, France and Spain and adapted for 18th-century silver and furniture design (Thomas Sheraton)3
Cabled fluting or cable ? Convex circular molding sunk in the concave fluting of a classic column, and rising about one-third of the height of the shaft2
Casing ? Final trim or finished frame around the top, and both sides of a door or window opening
Cartouche (French) escutcheon ? framed panel in the form of a scroll with an inscribed centre, or surrounded by compound moldings decorated with floral motifs
Cavetto ? (Italian) cavare: "to hollow", concave, quarter-round molding sometimes employed in the place of the cymatium of a cornice, as in the Doric order of the Theatre of Marcellus. It forms the crowning feature of the Egyptian temples, and took the place of the cymatium in many of the Etruscan temples.